软管泵_滑模机注重细节

不锈钢软管泵的保养：不锈钢泵紧固端面螺栓时，不锈钢泵用力要对称均匀；边紧边盘动转子。若遇到卡涩，不锈钢泵应松掉螺栓重新紧。电泵泵驱动轴不能承受任何径向垂直力，皮带、链条、齿轮等侧向驱动方式禁止使用。底板强的驱动轴与电机轴的连接采用弹性联轴器或链式联轴器。软管泵的齿轮油度要够，不要时间长了泵的底板一软，造成电机与泵不对中而损坏泵。弄清楚泵的允许高转速和现场工作高转速。务必让流体进到入口，尽量不要干转和空转。                 

首先我们先介绍一下软管泵，软管泵又称蠕动泵。为了泵体污染流体或流体污染泵体的危险性，整个泵的装置中只有软管与介质接触。在一般场合下，软管泵使用的都是天然橡胶的软管。内层和外层都是完整光滑的天然橡胶，其目的是很强防磨损。适用于腐蚀性不高但磨损性很大的如泥浆以及无机物等等介质。而且一般适用于脂肪、油类或油脂的介质，以及有机化学物质。内层是橡胶，而外层是天然橡胶或者是复合橡胶。

First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.